MRV touts pluggable interfaces on OD-4-DCI for data center interconnect

May 4, 2017
MRV Communications, Inc. (NASDAQ: MRVC) has jumped into the 1RU data center interconnect platform game with the OD-4-DCI. The company differentiates the platform from competitors in the increasingly crowded data center interconnect space through its ability to use line cards from other members of the company's OptiDriver family of WDM metro transport systems and, therefore, its support of pluggable interfaces.

MRV Communications, Inc. (NASDAQ: MRVC) has jumped into the 1RU data center interconnect platform game with the OD-4-DCI. The company differentiates the platform from competitors in the increasingly crowded data center interconnect space through its ability to use line cards from other members of the company's OptiDriver family of WDM metro transport systems and, therefore, its support of pluggable interfaces.

With one slot of the four-slot OD-4-DCI reserved for a management card, the platform offers three slots for various combinations of existing and future OptiDriver line cards, according to Zeev Draer, vice president of strategic marketing, and Mannix O'Connor, director of technical marketing at MRV. As those line cards accept pluggable optical transceivers (including CFP2 on the line side and QSFP28 on the client side), customers can tailor the platform to meet their needs and follow a "pay as you grow" implementation strategy, the company sources explained. Such application optimization will enable the same platform to meet the needs of service providers and data center operators as well, the MRV spokesmen added.

The multi-line-card, pluggable optics design also can improve system reliability, O'Connor pointed out. The ability to reuse line cards from other OptiDriver platforms improves return on investment and lessens the odds of stranded chassis space, the two sources said.

In its initial incarnation, the system will support a maximum per-port transmission rate of 100 Gbps; the company touts a total capacity of 1.2 Tbps per platform at launch. However, Draer and O'Connor expect total system capacity to climb as higher-rate optical transceivers become available. Draer said the company likely will support PAM4-based direct-detect operation as the necessary transceivers become available, augmented as necessary with companion amplifier and dispersion compensation capabilities MRV already offers.

As is the case with the other members of the OptiDriver line, network operators can use the MRV's Pro-Vision Life Cycle Service Orchestration (LSO) service management and orchestration software platform to control operation of the OD-4-DCI. The system also is designed for use in open optical line system environments.

The OD-4-DCI is generally available.

For related articles, visit the Data Center Topic Center.

For more information on high-speed transmission systems and suppliers, visit the Lightwave Buyer's Guide.

About the Author

Stephen Hardy | Editorial Director and Associate Publisher

Stephen Hardy has covered fiber optics for more than 15 years, and communications and technology for more than 30 years. He is responsible for establishing and executing Lightwave's editorial strategy across its digital magazine, website, newsletters, research and other information products. He has won multiple awards for his writing.

Contact Stephen to discuss:

  • Contributing editorial material to the Web site or digital magazine
  • The direction of a digital magazine issue, staff-written article, or event
  • Lightwave editorial attendance at industry events
  • Arranging a visit to Lightwave's offices
  • Coverage of announcements
  • General questions of an editorial nature

Sponsored Recommendations

Linear Pluggable Optics – The low-power optical interconnects for AI and Hyperscaled data centers.

Dec. 23, 2024
This LightWave webinar discussion will review the important technical differentiators found in this emerging interconnect field and how the electro/optic interoperability and ...

From Concept to Connection: Key Considerations for Rural Fiber Projects

Dec. 3, 2024
Building a fiber-to-the-home network in rural areas requires strategic planning, balancing cost efficiency with scalability, while considering factors like customer density, distance...

On Topic: Tech Forecast for 2025/ What Will Be Hot

Dec. 9, 2024
As we wind down 2024, Lightwave’s latest on-topic eBook will examine the hot topics for 2025. AI is at the top of the minds of optical industry players supporting...

Getting ready for 800G-1.6T DWDM optical transport

Dec. 16, 2024
Join as Koby Reshef, CEO of Packetlight Networks addresses challenges with three key technological advancements set to shape the industry in 2025.