Anaerobic multimode connectors
Anaerobic multimode connectors
The ST compatible and SC Quick Cure glass-insert multimode connectors combine the characteristics of the glass-in-ceramic ferrule and anaerobic adhesives. The ferrule holder is metal, because anaerobic adhesives chemically break down some polymers. The glass-insert multimode connector can be assembled on 900-micron buffered fiber or 3-mm fiber cable. The anaerobic adhesive uses a two-part epoxy process. It is first injected in the metal ferrule holder. The fiber is then dipped into the primer and inserted into the connector. According to the manufacturer, curing takes one minute without the use of lamps or ovens.
Siecor Corp.
Hickory, NC