Fiber termination kit

Jan 1st, 1997

Fiber termination kit

The JTK-4000 fiber-optic termination kit contains a standard selection of 38 basic tools. The kit accommodates SMA, AT&T, ST, FC/PC connectors, and other fiber technologies. It is housed in a 17.75 ¥ 14.5 ¥ 9.25-inch case with room for additional tools and test equipment. Some basic components include a cable-tie tool, ties and labels, coaxial-cable cutter, tape dispenser, fiber scribe, hook blade knife, scissors, and wire strippers. An optional package contains a FiberVue microscope kit, a curing oven, an AMP crimping tool, and two fiber-cable test instruments.

Jensen Tools Inc.

Phoenix, AZ

More in Design & Manufacturing

Is your Network Ready for 400GbE?

Is your Network Ready for 400GbE?

Learn how network operators can support 100G and 400G client traffic across DCI edge, metro, long-haul, and submarine applications in an efficient, scalable, and cost-effective manner with multi-haul coherent solutions.

The T-BERD/MTS 400G is one of three product introductions VIAVI will make at ECOC 2019.

VIAVI to intro lab and field test systems for high-speed applications at ECOC 2019

The new instruments include the T-BERD/MTS 400G Network Tester, MAP-300 photonic metrology and test automation platform, and additions to the ONMS suite.

L Woptotestadapters091219

OptoTest offers 16f MTP, duplex LC, CS adapters for its OP-SPHR Integrating Sphere

The adapters expand the number of connectors across which technicians can measure insertion loss and return loss of all fibers without having to move or slide the adapter, says the company.

Binary 1607161 1920

Finisar’s WaveAnalyzer 1500S/L High Resolution Optical Spectrum Analyzer targets L-Band

The OSA is based on heterodyne measurement technology and provides a resolution bandwidth of 180 MHz.

UNH-IOL hosts interoperability demonstrations as well as provides test and certification services and resources.

UNH-IOL offers Test Sentinel 2.0 for automated Broadband Forum Gfast, DSL, Wi-Fi testing

The new release enables users to create and run their own test scripts while using the Test Sentinel’s previous features.

Dollar 2891817 1920

VeEX offers test equipment financing via Marlin partnership

VeEX’s direct sales team and authorized distributor network will offer access to the financing options, says the company.

VeEX unveils MPM-400AR 400GbE QSFP-DD PAM4 test module for MPA Series

The MPM-400AR module supports dual simultaneous and independent 400GbE QSFP-DD ports along with dual QSFP56 and SFP56 ports.

JGR Optics unveils PT1 – Polarity Tester

Now available, the PT1 polarity tester offers a touchscreen interface to enable one touch testing of typical pre-programmed type A, B, C, and configurable custom profiles.

L Woptotest Hero062619

Switches, Lossy Components, and the Need for External Reflectance Standards

This article focuses on RL measurement setups that are prone to introducing testing errors. Ways to mitigate these errors are discussed. Some errors are unavoidable; therefore, steps for correcting them out or reducing them are also described here.

Binary 1607161 1920

Luna Innovations offers 6415 Lightwave Component Analyzer

Luna Innovations Inc. (NASDAQ: LUNA) has unveiled the 6415 Lightwave Component Analyzer, the first example of what the company asserts will be a new generation of high-performance, high-resolution analyzer products.

L Wglcomms051319

GL Communication offers LightSpeed1000 OC-3/12 and STM-1/4 Analysis and Emulation Platform for channelized and unchannelized applications

GL Communications Inc. has launched the LightSpeed1000 OC-3/12 and STM-1/4 Analysis and Emulation Platform. The platform, which comprises a PCIe card and USB pod, offers wire-speed processing in support of such functions as BERT, recording, playback, and monitoring for channelized embedded T3s, E3s, T1s, and E1s as well as unchannelized Asynchronous Transfer Mode (ATM) and Packet over SONET (PoS).

April major month for making moves

Several members of the optical communications community have found themselves with new jobs this month. There’s new leadership at a pair of test equipment companies, an international network services provider, and a submarine networks consultancy.

Content Dam Lw Online Articles 2019 04 Lwarden041819

Arden Photonics FGC-GA measures multifiber V-groove array geometry, fiber alignment

Arden Photonics has the FGC-GA, an automated instrument for measuring the geometry and fiber alignment of multifiber V-groove arrays. The system measures the X and Y offset as well as the core-core pitch of optical fibers over a 15-mm range via transmitted light. Image stitching is then used to provide a full image of each core.

Content Dam Lw Online Articles 2019 04 Lwsumix041819

Sumix Manta-W+ inspection scope accommodates 3M Expanded Beam Optical Connector

Sumix Corp., working with 3M, has developed an adapter for its Manta-W+ fiber inspection microscope that enables the instrument to inspect 3M’s recently announced Expanded Beam Optical Connector. While the new fiber-optic connector is designed to be less sensitive to dust and other particles on the fiber endface, installations will still need inspection, Sumix points out.