PMC-Sierra HyPHY chips support OIF’s OTN-over-packet-fabric agreement

Jan. 19, 2012
PMC-Sierra Inc., (NASDAQ:PMCS) says that its HyPHY Optical Transport Network (OTN) processors already support the Optical Internetworking Forum’s (OIF’s) recently completed OTN-over-Packet-Fabric Protocol Implementation Agreement (IA). The HyPHY 20G and HyPHY 10G chips had a head start on the support effort – PMC says the IA is based on features within the chip family at the time of its debut in 2009.

PMC-Sierra Inc., (NASDAQ:PMCS) says that its HyPHY Optical Transport Network (OTN) processors already support the Optical Internetworking Forum’s (OIF’s) recently completed OTN-over-Packet-Fabric Protocol Implementation Agreement (IA). The HyPHY 20G and HyPHY 10G chips had a head start on the support effort – PMC says the IA is based on features within the chip family at the time of its debut in 2009 (see “PMC-Sierra offers OTN-centric multi-service convergence devices for metro apps”).

The IA aims to make it easier for systems developers to create a single switching fabric for both OTN and packet-based traffic. The IA defines the mapping protocol for converting OTN streams – including those based on ODU0 and ODUflex – into packets while preserving their frequency and phase. The protocol can be implemented via ASSP, FPGA, or ASIC. The result is the ability to create a single switching fabric for systems such as packet-optical transport platforms.

“Carriers worldwide are adopting OTN switching as a method to provide sub-wavelength switching to their converged optical transport infrastructure,” said Mark Pashan, general manager, optical transport products, Tellabs. “The ability to combine OTN with packet switching on the same platform provides them maximum flexibility in network designs to optimize costs.”

The HyPHY 20Gand HyPHY 10G OTN processors are designed to support the IA via the Constant Bit Rate Interface (CBRI) and OTN Phase Signalling Algorithm (OPSA). Through CBRI and OPSA, PMC sources say both HyPHY devices can accept traffic from a variety of sources and in a variety of different protocol formats, map and multiplex the traffic into OTN, and output the result in one of two forms:
fully formed ODUk/OTUks over serial links, as required to directly connect to optical modules,
packetized ODUks over Interlaken, as required to interface to a packet/cell switch for electrical switching of OTN

PMC sources reveal that “7 of the top 9” network equipment manufacturers are customers for the device. The company has revealed Fujtisu and FiberHome as two of these customers.

“Enabling OTN Switching over Packet/Cell Fabrics,” a whitepaper that explains the benefits of switching ODUs over a packet fabric, is available on PMC’s website (registration required).

For more information on communications semiconductors and suppliers, visit the Lightwave Buyers Guide.

Sponsored Recommendations

Coherent Routing and Optical Transport – Getting Under the Covers

April 11, 2024
Join us as we delve into the symbiotic relationship between IPoDWDM and cutting-edge optical transport innovations, revolutionizing the landscape of data transmission.

Supporting 5G with Fiber

April 12, 2023
Network operators continue their 5G coverage expansion – which means they also continue to roll out fiber to support such initiatives. The articles in this Lightwave On Topic ...

Advancing Data Center Interconnect

July 31, 2023
Large and hyperscale data center operators are seeing utility in Data Center Interconnect (DCI) to expand their layer two or local area networks across data centers. But the methods...

Scaling Moore’s Law and The Role of Integrated Photonics

April 8, 2024
Intel presents its perspective on how photonic integration can enable similar performance scaling as Moore’s Law for package I/O with higher data throughput and lower energy consumption...