Boost converter with current monitor targets APD-biasing

April 1, 2009
APRIL 1, 2009 -- Maxim Integrated Products has introduced the MAX15031, a constant-frequency, pulse-width modulated (PWM) step-up converter that is designed for low-voltage systems that require a locally generated high voltage.

APRIL 1, 2009 -- Maxim Integrated Products (search Lightwave for Maxim) has introduced the MAX15031, a constant-frequency, pulse-width modulated (PWM) step-up converter that is designed for low-voltage systems that require a locally generated high voltage.

Operating from a 2.7- to 11-V supply, the device delivers a low-noise output voltage up to 76 V (300 mW of power) without an external voltage doubler. Additionally, Maxim says its BiCMOS process technology enables the MAX15031 to integrate a high-side current monitor with fast (1-microsec) current limiting to save space and cost in diode-biasing applications. This device is designed for applications such as avalanche photodiode (APD) biasing, PIN biasing, and varacter biasing in fiber modules.

The MAX15031 uses a peak current-mode PWM architecture with a fixed switching frequency of 400 kHz to produce a low-noise output. The onboard current monitor offers three decades of dynamic range, and monitors current from 500 nA to 4 mA with high accuracy. Resistor-adjustable current limiting protects the APD from optical power transients. Internal soft-start circuitry limits the input inrush current during power up, while a clamp diode protects the monitor's output from over-voltage conditions.

The MAX15031 is available in a 4x4-mm, 16-pin TQFN package, and is fully specified over the -40 degrees Celsius to +125 degrees Celsius temperature range. Prices start at $1.65 (1000 up, FOB USA).

Visit Maxim Integrated Products

For more optical equipment design information, visit the Optical Equipment Design Center

Sponsored Recommendations

April 10, 2025
The value of pluggable optics in open-line systems is also becoming more apparent. This webinar describes this trend and explores how such modules can best be employed. Register...
April 12, 2023
Network operators continue their 5G coverage expansion – which means they also continue to roll out fiber to support such initiatives. The articles in this Lightwave On ...
May 30, 2024
Discover the revolution of pluggable transceivers in our upcoming webinar, where we delve into the advancements propelling 400G and 800G coherent optics. Learn how these innovations...
April 11, 2025
Taking a comprehensive approach to developing electronic products is the key to successful outcomes.