Fiber-optic connector polisher
mcp24 connector polisher polishes 6 to 24 connectors at one time in a figure-8 pattern. The polishing process is computer controlled and has a pneumatic pressure regulation system. It features a radius of curvature of 20 mm (+5mm/-10 mm), apex offset of less than 50 micron, undercut of less than 0.1 micron, insertion loss of less than 0.3 dB and return loss of less than -55 dB (PC polish).
Nanometer Technologies
Paso Robles, CA
Sponsored Recommendations
Sponsored Recommendations