Wire-pulling lubricant wax

Sept. 1, 1996

Wire-pulling lubricant wax

Wire-pulling lubricant wax can be used at temperatures to 194°F (90°C) and immersed in water for 30 minutes. Its low friction coefficient reduces the chance of wire damage. The wax prevents waste and excessive use of a liquefied lubricant and is compatible with common wire and cable jackets.

3M Telecom Systems Division

Austin, TX

Sponsored Recommendations

Connecting the world, one fiber at a time

Dec. 12, 2023
The world runs on ethernet: the future of higher speeds

Supporting 5G with Fiber

April 12, 2023
Network operators continue their 5G coverage expansion – which means they also continue to roll out fiber to support such initiatives. The articles in this Lightwave On ...

From 100G to 1.6T: Navigating Timing in the New Era of High-Speed Optical Networks

Feb. 19, 2024
Discover the dynamic landscape of hyperscale data centers as they embrace accelerated AI/ML growth, propelling a transition from 100G to 400G and even 800G optical connectivity...

Advancing Data Center Interconnect

July 31, 2023
Large and hyperscale data center operators are seeing utility in Data Center Interconnect (DCI) to expand their layer two or local area networks across data centers. But the methods...