Semtech adds combo chip, TIA to FiberEdge line for 10G-EPON OLTs

March 28, 2019
Semtech Corp. (NASDAQ:SMTC) has added the GN7154 combo chip and the GN7056 transimpedance amplifier (TIA) for 10G-EPON optical line terminals (OLTs) to its FiberEdge line.

Semtech Corp. (NASDAQ:SMTC) has added the GN7154 combo chip and the GN7056 transimpedance amplifier (TIA) for 10G-EPON optical line terminals (OLTs) to its FiberEdge line.

The bidirectional GN7154 will support 1G and 10G-EPON OLT designs. The transmit data path leverages Semtech’s 10G EML driver with ClearEdge CDR referenceless technology to reset the path jitter budget. Use of an I2C programmable PLL loop bandwidth control and a variety of jitter filter modes enables Tx path optimization. The EML driver includes eye-shaping features and an automatic power control loop. The burst mode receive data path includes two separate limiting amplifiers, one for 1G EPON and the other for 10G-EPON, with a fast burst mode signal detect function. The Rx path outputs 10G data at CML levels, while the 1G Rx output is available at CML or LVPECL levels depending on the device version.

The GN7056 burst mode TIA features a fast automatic gain control loop to enable high dynamic range in burst mode applications. The GN7056 is offered in die form, supports industrial temperature range, and uses a single 3.3-V power supply.

“The upsurge in the 10G-EPON market is expected to continue and we believe these products will help drive this growth,” said Dr. Timothy Vang, vice president of marketing and applications for Semtech’s Signal Integrity Products Group. “Our engineering team has produced another unique chipset that delivers higher performance and enables lower manufacturing costs through further integration.”

For related articles, visit the Optical Technologies Topic Center.

For more information on communications semiconductors and suppliers, visit the Lightwave Buyer’s Guide.

Sponsored Recommendations

Supporting 5G with Fiber

April 12, 2023
Network operators continue their 5G coverage expansion – which means they also continue to roll out fiber to support such initiatives. The articles in this Lightwave On ...

Scaling Moore’s Law and The Role of Integrated Photonics

April 8, 2024
Intel presents its perspective on how photonic integration can enable similar performance scaling as Moore’s Law for package I/O with higher data throughput and lower energy consumption...

Moving to 800G & Beyond

Jan. 27, 2023
Service provider and hyperscale data center network operators are beginning to deploy 800G transmission capabilities – but are using different technologies to do so. The higher...

Constructing Fiber Networks: The Value of Solutions

March 20, 2024
In designing and provisioning a fiber network, it’s important to think of it as more than a collection of parts. In this webinar, AFL’s Josh Simer will show how a solution mindset...