Emtelle HomeConnect for preconnectorized cable internal/external FTTP drop cable deployments

Feb. 25, 2019
Emtelle has unveiled the Emtelle HomeConnect preconnectorized fiber cabling system designed to meet both internal and external fiber to the premises (FTTP) drop cable requirements. Use of the system provides both installation and time and cost savings, the company asserts.

Emtelle has unveiled the Emtelle HomeConnect preconnectorized fiber cabling system designed to meet both internal and external fiber to the premises (FTTP) drop cable requirements. Use of the system provides both installation and time and cost savings, the company asserts.

Emtelle HomeConnect, which leverages Emtelle’s blown fiber system expertise, leverages a small, flexible fiber cable available in lengths of 5, 20, 30, and 50 m as well as a variety of external colors. The fiber cable features a 3-mm Low Fire Hazard (LFH) sheath for internal use that is covered by a slidable and adjustable 5-mm PE sheath for external use. The fiber-optic cable comes preconnectorized with either an LC or SC connector at the customer site end.

In the field, installers deploy the cable at the internal customer connection point (CCP) where the connectorized end is plugged into, from which the polyethylene outer sheath is adjusted to expose enough LFH tube to route internally to the customer lead in point. The cable is then pushed through the lead-in point to the outside of the building, where the sheath changes over from LFH to polyethylene. The external customer lead-in kit at the building completes the Emtelle HomeConnect installation, with capping, cable guard, a wall plate or the customer connection enclosure (CCE) protecting the cable through its transition from internal to external use.

Emtelle will display Emtelle HomeConnect at Booth G14 at FTTH Conference 2019 in Amsterdam, from March 13 to March 14.

For related articles, visit the FTTx Topic Center.

For more information on FTTx technology and suppliers, visit the Lightwave Buyer’s Guide.

About the Author

Stephen Hardy | Editorial Director and Associate Publisher

Stephen Hardy has covered fiber optics for more than 15 years, and communications and technology for more than 30 years. He is responsible for establishing and executing Lightwave's editorial strategy across its digital magazine, website, newsletters, research and other information products. He has won multiple awards for his writing.

Contact Stephen to discuss:

  • Contributing editorial material to the Web site or digital magazine
  • The direction of a digital magazine issue, staff-written article, or event
  • Lightwave editorial attendance at industry events
  • Arranging a visit to Lightwave's offices
  • Coverage of announcements
  • General questions of an editorial nature

Sponsored Recommendations

April 12, 2023
Network operators continue their 5G coverage expansion – which means they also continue to roll out fiber to support such initiatives. The articles in this Lightwave On ...
April 10, 2025
The value of pluggable optics in open-line systems is also becoming more apparent. This webinar describes this trend and explores how such modules can best be employed. Register...
May 30, 2024
Discover the revolution of pluggable transceivers in our upcoming webinar, where we delve into the advancements propelling 400G and 800G coherent optics. Learn how these innovations...
Sept. 25, 2024
Struggling to balance customer demand with the challenges of network upgrades, rollout of new products and services, and guaranteeing service level agreements (SLAs)? Discover...